Pressure vessels, heat exchangers, reactors and columns — designed, fabricated and tested in-house to ASME, PED and GB codes.
Four standard series cover most process duties. Special designs outside these ranges are quoted as engineered-to-order items.
General-purpose storage and process vessels with dished heads and support skirts.
Get SpecsFixed and floating head designs for heating, cooling, condensing and reboiling.
Get Specs
Jacketed or half-pipe coil reactors with agitator options for batch chemistry.
Get Specs
Pre-assembled vessels, pumps, valves and instrumentation on a single frame.
Get SpecsStandard design envelope of the PV series. Custom sizes and materials are available on request.
| Parameter | Standard Range | Options |
|---|---|---|
| Volume | 0.5 – 100 m³ | Larger sizes as engineered-to-order |
| Design pressure | Full vacuum – 10 MPa | Higher on request |
| Design temperature | -196 °C – 350 °C | Cryogenic / high-temp execution |
| Materials | Carbon steel, S30408 / S31603 | Duplex, titanium, nickel alloys |
| Codes | GB 150, ASME VIII Div.1 | PED 2014/68/EU, PD 5500 |
| Nozzles | DN25 – DN600, flanged | Custom orientation and rating |
| Surface finish | Sa2.5 blast + epoxy | Mirror polish / pickling |
| Documentation | Mill certs, WPS/PQR, RT report | Third-party inspection (SGS / TÜV / BV) |
From your data sheet to a shipment-ready vessel, every step is handled inside our factory and documented in a formal inspection and test plan.
Send us your process data sheet — our design office will return a budget offer within 24 hours.